Furuno Software Updates
Read Microsoft Word - NavNet VX2 Software Update Procedure _3_.doc text version NavNet VX2 Software Update Procedure The following steps describe the software update process for the NavNet VX2 displays and BB processor units. Note that all VX2 displays and processor units in a network should be updated. First, confirm the current software version of your display(s). The software version is shown upon powering up the unit. The software version can also be accessed by performing the following keystrokes: Press the MENU button, then press SYS CONFIG>SYSTEM SETUP>TEST AND CLEAR>MEMORY I/O TEST>DISPLAY UNIT TEST. If the software version is older than what is currently available, proceed as shown below.
You may either get a preloaded SD card from FURUNO, (# SD1-VX2-SOF) or download the files from the applicable software page at www.FURUNO.com. If you have a preloaded card from FURUNO, continue to step 3. If downloading the zipped file from FURUNO, download and unzip the files. There will be several files. Copy these files from your PC to the root directory (no folder) of a blank SD (secure digital) card. (You must format the SD card first with the FAT file system using an SD Card Reader. Remember to 'eject' the card using the eject instructions before physically removing the card).
This video introduces you to new features and enhancements brought to you by the 4.01 software update for Furuno's NavNet TZtouch2 MFD. NavNet TZtouch software update. Make sure your NavNet is always up to date with the latest software and new features. NavNet TZtouch’s newest software version 3.12 includes some improvements. FURUNO applies its sophisticated electronics, ultrasonic and computer technologies to other industrial sectors. The company's new growing businesses include, Data Management Devices for office and store automation, Avionics Equipment, Marine and Land Survey Systems and Medical Electronics Equipment. This video walks you through how to update your NavNet TZtouch to the latest software version by simply connecting to the Internet via a WiFi connection.
For 7' and 10.4' display units 3. With the power turned off, insert the SD card into the NavNet VX2 display card slot.
Then power up / turn on the display unit. You should hear one beep to confirm power on; there will be no graphics displayed on the screen. Captain tsubasa 2 nes hack by wakashimazu 1 download.
After about 10 seconds another beep sounds; at this time you will also see a 'Furuno Bridge Graphic' on the screen. After about 40 seconds you will get a short series of beeps; at this time the view of the 'Furuno Bridge Graphic' will change. DO NOT turn off the unit during the following process, otherwise the system cannot be powered up again, requiring factory repair.
Furuno 1870f Software Updates
After approximately two minutes the display will beep consistently. Press in on the SD card and remove the SD card from the display. The unit will power down automatically. Turn on the unit and confirm that the program number is correct. For VX2 BB Processors units With the power turned off, insert the SD card into the NavNet VX2 BB processor card slot. Then power up / turn on the processor unit.
Serial Search Tips When searching for Alsee 5.3 do not include words such as serial, number, key, license, code, etc. Excluding words such as these will result in much more accurate results. Recheck your spelling for Alsee 5.3 just in case, you might also want to try searching without the version number. Alsee 5.3 serial.
Furuno Tzt2 Software Updates
You should hear one beep to confirm power on; there will be no graphics displayed on the screen. After about 10 seconds you will see a 'Furuno Bridge Graphic' on the screen. After about 40 seconds the view of the 'Furuno Bridge Graphic' will change. DO NOT turn off the unit during the following process, otherwise the system cannot be powered up again, requiring factory repair. The BB processors do not beep when finished. To confirm that the update has been completed on the BB: A.
Furuno Navnet Tztouch2 Software Update
Remove the cover plate to the right of the Power LED to observe the status of green LED (CR1). After about two minutes, the software update will be finished and CR1 will begin blinking rapidly. Turn the BB off, remove the SD card, and then power on the processor unit.
Or After turning on the BB processor unit, walk away for 5 minutes. The software update will be completed by then.
Eject the SD card. Power on the unit. Do a self-test to confirm updated software version has loaded. No master reset is required, and all waypoints, lines, marks and settings should be retained.